• 1.25KW Heavy Duty Motor Controller

A small but powerful controller for brushed motors that uses automotive-grade relays to handle hundreds of amps, and still gives you solid-state PWM speed control.

A More Powerful Polulu

We use the Pololu MD03A motor controller regularly in our shop, but as it is capped at 500W, it wasn't up for some more robust applications that we wanted. Our solution was to create the Heavy Hybrid Motor Controller, which uses the same wiring as the Pololu board but can work at up to in excess of 1.21 kilowatts.


Depending on the relays installed, the board can run at 12 volts or 24 volts. An off-the-shelf VF4 relay can be sourced from any automotive supply store, making replacement very easy. Additionally, the ability to apply braking can be traded off for single-pin control over directionality - the controller only needs 4 pins to operate. When jumpers are removed, the module functions as would a Pololu module, but closing the jumpers allow for a 4-pin control mode.

The linear voltage regulator generates 5 volts which may be used for your add-on hardware. We call this a hybrid drive, because though it primarily uses TrenchFET, the relays used in changing direction and has been successfully tested over 1.25 kilowatts.

Write a review

Note: HTML is not translated!
    Bad           Good

1.25KW Heavy Duty Motor Controller

  • $105.00

Available Options

Related Products

Antbot Rover

Antbot Rover

Android Robotics Since 2010. The original Android robotics solution, continually improved since 20..


One Inch Punch Controller

One Inch Punch Controller

Tiny Controller, Big PunchOne Inch Punch is a powerful microcontroller, with only one square inch of..


Delivery Truckbot

Delivery Truckbot

Antbot Brains, Strong BackThis light duty hauling rover chassis is built from recycled materials! ..


Telepresence Robot

Telepresence Robot

Remote Work and Communication - AnywhereA five-foot-tall telepresence robot that won’t break the ban..