<< Go Back
A Monitor Bezel Laser Cut by Davide Antonello

Making a Monitor Bezel with L-Cheapo

Apr 15, 2020

in: lasers

The L-Cheapo laser cutter is a great tool for artistic projects. Davide Antonello, a graphic designer and artist from Italy, sent us these photos of a monitor he rebuilt using laser cut plywood.

The build was done on an L-Cheapo Mk6 with 3mm poplar plywood stock. It took just under 4 hours to do this 15 inch screen plus soundbar, total dimensions of 36x28x4cm.

Thanks again to Davide for sending us this. Great build! You can find him on Instagram at @Davidehandmade, and he would be happy to help with your next graphics project.

If you’re looking for the laser used to make this project, you can find it on our products page.

A single photo of the monitor laser cut by Davide Antonello